SpeicalView

To Special View

Tutorial

Hello, So glad you could stop by to see me again

Later I am having a Party and I would Like

You to stay and have some Fun

So while we are waiting For All the Guest to arrive

We can do this Tutorial Together

************

Here is what you will need If you don't have

The Paint Shop Pro Program Here is where you can

Find it = Click here

This Tutorial was done in PSP 7 but I am sure

It will work fine for you with PSP8

A Special Note

Please respect the time and effort that I have put into writing this tutorial

By not copying, in whole or any part, to any other web site, list or groups

And or claiming it as your own. If you belong to a Graphics Group

And you think your members may be interested in doing this tutorial.

I would ask that you send me an email to let me knew, before providing

A link to this site I would be thrilled with your Interest,

And Knowing who you Are

Thank you

©CopyrightedGraphicsByToni2004

Here are the Selections Files you will Need

Download Selections Files=Click Here

You will Put these Files in your Selections Folder

In Your PSP

Here are the Imagine Files you will Need

Download Image Files=Click Here

You will Put these Files in your Image Folder

In Your PSP

You Also Need for This

Free Filter by MuRa's Filter Meister called "prospective tiling" After download Put your Tiling Filter in your

Plug-in Folder in PSP

You can download
Click Here

************

*For More Advance Users of PSP*

If at anytime you want to use your own Patterns or

Change Color's of your choice

Please feel free to do so

*************

Let's Get Started
*********
Open a New Canvas
700x420x16million

Now the Big Part SAVE! SAVE! SAVE!
If you can't remember Like I do All the time
Go to your Preference down on your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
********
With Any of the Colors I will be using if you would

Like a Wallpaper a Different use of Colors

Please do so What I give you is Just a Guide to

Make the Room it's All up to you How you want

To See it Decorated just have Fun with it

************

1.) Add a New Raster Layer=Go to Selection=Load from

Disk="Big Floor"=Copy and Paste your Teal tile Into

Selection=Keep Selected and Now Go to Effects to Plug in

And Use your MuRa's Tiling Filter Use theses Settings

I will Not Omit that I am good at doing Tile so

If this doesn't work for you Just Play with it

Or if All else fails Floor Fill with Color

he he he he

Deselect= rename" Big Floor"

***********

2.)Add a New Raster Layer=Go to Selection=Load from

Disk="Foyer Wall" Flood fill with this color#637370

Deselect=rename="Foyer Wall"

**********

3.)Add a New Raster Layer=Go to Selection=Load from

Disk="Foyer Floor" Copy and Paste your Wood Tile Into

Selection=deselect=rename=*Foyer Floor*

************

4.)Add a New Raster Layer=Go to Selection=Load from

Disk=*Wall Right* Flood fill with this color#C8D2DA

Deselect=rename="Wall right"

***********

5.)Add a New Raster Layer=Go to Selection=Load from

Disk="View" Copy and Paste your View scene Image

Into Selection=Deselect=rename="View"

***********

6.)Add a New Raster Layer=Go to Selection=Load from

Disk="Deck Railing" Flood Fill with this color

#6A523A= If you like here You can use this Bevel Setting

For the Railing

Deselect=rename=*Deck Railing*

***********

7.)Add a New Raster Layer=Go to Selection=Load from

Disk="Outside Deck"=Copy and Paste your Wood 2 Pattern

Into Selection=deselect=rename=*Outside Deck"

************

8.)Add a New Raster Layer=Go to Selection=Load from

Disk="All Post*Flood Fill with Color#A89270

Use these Settings for the Post Bevel

Deselect=rename= "All Post*

*Note* In My Picture here I made a small sel for over my Window view I didn't add it to the files But you can leave it Open use a Stain Glass or use your Magic Wand and Click

In side at the Top you will get the Marching Ant's then You Can Flood fill it with a Color, Pattern, or Copy and Paste Stain Glass in to it or Just leave it Open for more of a View What ever you would like there

***********

9.)Add a New Raster=Go to Selection=Load from Disk=

"Floor Shadow"=Flood Fill with this color#6A523A

Deselect=rename="Floor Shadow"

**********

10.)Add a New Raster Layer=Go to Selection=Load from

Disk="Wood Floor"=Copy and Paste Your Wood 2

That we used for the Deck outside Into Selection

Deselect=rename="Wood Floor"

**********

11.)Add a New Raster Layer=Go to Selection=Load from

Disk="Shadow Wall Right" Flood fill with this color

#798D89=deselect=rename="Shadow Wall Right"

**********

12.)Add a New Raster Go to selection=Load from Disk

"Light Arch On Right*Flood fill with this color#798D89 Deselect=rename="Light right Arch"

************

13.)Add a New Raster Layer=Go to Selection=Load from Disk

" Center Long" Flood fill with this color#C8D2DA Deselect=rename="Center Long"

***********

14.) Add a New Raster Layer=Go to Selection=Load from

Disk="Floor Steps" Now Copy and Paste your Floor Steps

Image I sent you Into Selection=deselect=rename=

*Floor Steps*

**********

15.)Add a New Raster Layer=Go to Selection=Load from Disk="Inside Wall" Flood fill with this Color#637370

Deselect=rename="Inside Wall"

************

16.)Add a New Raster Layer=Go to Selection=Load from Disk

"Stair Wall" Flood Fill with this Color#C8D2DA Deselect=rename="Stair Wall"

***********

17.) Add a New Raster Layer=Go to Selection=Load From disk "Shadow Wall Left" Flood fill with this color#637370

Deselect=rename="Shadow Wall Left"

**********

18.)Add a New Raster Layer=Go to Selection= Load from disk

"Light Arch Left*=Flood Fill with this color#798D89

Deselect=rename="Light Arch Left"

***********

19.)Add a New Raster Layer=Go to Selection=Load from disk

"Wall to Left* Flood fill with this color#C8D2DA Deselect=rename=*Wall to Left*

***********

20.)Add a New Raster Layer=Go to Selection=Load from disk

"Stair Ceiling" Flood fill with this color#C1C1B7 Deselect=rename=*Stair Ceiling*

***********

21.)Add a New Raster Layer=Go to Selection=Load From disk "Big Stairs" Copy and Paste your Big Stairs Into Selection Deselect=rename="Big Stairs"

************

22.)Add a New Raster Layer=Go to Selection=Load from disk

*Foyer Door*Now copy and paste your Door image Into

Selection=deselect=rename=*Front Door*

********

That's It All done Now have Fun if you want something

In front of something then add a layer up if you want

Something Behind then add a Layer down

When your Happy with All Click on your Bottom Layer

Then you can go to Layers= Merge=Merge visible

If you don't want to Finish this all at one time you can

Go to Workspace on your Menu and Save As there so

You can work on it later with out having to Merge it

Till you are All done and Happy =0)

**********

If for any reason I left something out of a file
Or you are having a problem with something
Feel free to E-MAIL me
*********
Please do not send this Tutorial in e-mail
*Special View*
When it is done it will be yours to
Do what you would like with it
But do not Call it your own
Or Copy, Reproduce, Republish plus add
It to any collection without My Permission

*********