TheMuriel

To The Muriel

Down Where The Palm Trees Sway and The Sun Shines 365 days

You Will Find The Muriel For This Lovely Lady You Go Around

The Back of Her House No Need To Knock On Her Front Door

She Will Be Waiting For you at Pool Side

*************

Here is what you will need If you don't have
The Paint Shop Pro Program Here is where you can
Find it = Click here

This Tutorial was done in PSP 7 but I am sure
It will work fine for you with PSP8
*******
A Special Note
Please respect the time and effort that I have put into writing this tutorial
By not copying, in whole or any part, to any other web site, list or groups
And or claiming it as your own. If you belong to a Graphics Group
And you think your members may be interested in doing this tutorial.
I would ask that you send me an email to let me knew, before providing
A link to this site I would be thrilled with your Interest,
And Knowing who you Are
Thank you
©CopyrightedGraphicsByToni2004
********

Here are the Selections Files you will Need
Download Selections Files=Click Here
You will Put these Files in your Selections Folder
In Your PSP
Here are the Imagine Files you will Need
Download Image Files=Click Here
You will Put these Files in your Image Folder
In Your PSP
************

Let's Get Started
*********
Open a New Canvas
650x255x16million

Now the Big Part SAVE! SAVE! SAVE!
If you can't remember Like I do All the time
Go to your Preference down on your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
********
With Any of the Colors I will be using if you would
Like a Pattern a Different use of Colors
Please do so What I give you is Just a Guide to
Make the House it's All up to you How you want
To See it Decorated just have Fun with it
************
*Note*
This has many .sels files But it will be as easy as
I could make it for you Most of it will be Flood fills

And quiet a bit of Copy and Paste
***********

*With they Opening of Your New Canvas we have a layer

This Layer I would like you to name it *Background*

*********

1.)Add a New Raster Layer=Go to Selection= Load from disk

*Roof 1* Copy and paste your Roof 1 Image Into Selection

Deselect=rename=*Roof 1*

***********

2.)Add a New Raster Layer =Go to Selection =Load from disk

*Roof 2* Copy and paste your Roof 2 Image Into Selection

Deselect=rename=*Roof 2*

***********

3.)Add a New Raster Layer=Go to Selection=Load from disk

*Roof 3* Copy and paste this Roof 3 image Into Selection

Deselect=rename=*Roof 3*

************

4.)Add a New Raster Layer=Go to Selection=Load from disk

*Roof 4* Now Copy and Paste the Roof 4 image Into Selection

Deselect=rename=*Roof 4*

***********

5.)Add a New Raster Layer=Go to Selection=Load from disk

*Big Center Wall* Ok Now we are going to do something a Bit

Different here Go to your Color Pallet And In Foreground put

The Color#FFFFFF Now on the Bottom which is your

Background click on it and Go to Pattern On the List in there

Look for *Spatch* Now after we have this Set you will Now make

*Spatch* Your Foreground and your Color#FFFFFF will be your

Background Use these Settings in the Screen shot here

We will be using This Method for All the Wall of the House

Now FF with the *Spatch* set in your Foreground

Now deselect=Rename=*Center Wall*

***********

6.)Add a New Raster Layer=Go to Selection=Load from disk

*Frame Outline Right* Copy and paste your frame image

Into Selection=rename=*Frame Right*

***********

7.)Add a New Raster Layer=Go to Selection=Load from disk

*Frame Outline Left* Copy and paste this frame image

Into Selection=rename=*Frame Left*

***********

8.)Add a New Raster Layer=Go to Selection=Load from disk

*Long Trim Center Wall* Copy and paste Your Long Trim

Into Selection=deselect=rename=*Center Trim*

***********

9.)Add a New Raster Layer=Go to Selection=Load from disk

*Green Window Over Door* Copy and paste your window

Into Selection=deselect=rename=*Center Window*

***********

10.)Add a New Raster Layer=Go to Selection=Load from disk

*Steps* Copy and paste your steps= Into Selection =deselect

Rename=*Steps*

**********

11.)Add a New Raster Layer=Go to Selection=Load from disk

*Front Door*Now Copy and paste your Front Door Into

Selection=deselect=rename=*Front Door*

**********

12.)Add a New Raster Layer=Go to Selection=Load from disk

*Front ROOF Right* Copy and paste this roof Into Selection

Deselect=rename=*Roof Right*

************

13.)Add a New Raster Layer=Go to Selection=Load from disk

*Right Side Wall* Here we are going to Use the

FF=Color#FFFFFF and the *Spatch Pattern* again using

All the same as we did the first time re-look at the

Screen Shot=then Deselect=rename=*Right Side Wall*

***********

14.)Add a New Raster Layer=Go to Selection=Load from disk

*Shadow Under Eves Right*=FF with this Color#808080

Now drop your *Slide* down from 100% to 63%

Deselect=rename=*Shadow right*

***********

15.)Add a New Raster Layer=Go to Selection=Load from disk

*Long Trim Side Right* Copy and Paste this Image Into

Selection=deselect=rename=*Trim side right*

************

16.)Add a New Raster Layer=Go to Selection=Load from disk

*Shadow On Right Side* FF=with this Color#B1B1A9

Now drop your *Slide* down from 100% to 63%=deselect

Rename=*Shadow Side Right*

************

17.)Add a New Raster Layer=Go to Selection=Load from disk

*Front Left ROOF*=copy and Paste your roof image Into

Selection=rename=*Left front roof*

*************

18.)Add a New Raster Layer=Go to Selection=Load from disk

*Left Side Wall* Here we are going to do the Same as we did

With All the Walls with Color#FFFFFF and

The *Spatch* Pattern Using all the same settings we did

In the Screen Shot=deselect=rename=*Left Side Wall*

**********

19.)Add a New Raster Layer=Go to Selection=Load from disk

*Shadow under Eves Left*=FF with this Color#808080

Now drop your*Slide* from the 100% to 63%=deselect=

Rename=*Shadow Left*

************

20.)Add a New Raster Layer=Go to Selection=Load from disk

*Long Trim Side Left* Copy and paste your Trim Into

Selection=deselect=rename=*Trim Left*

************

21.)Add a New Raster Layer=Go to Selection=Load from disk

*Shadow On Left Side* FF with this Color#808080 now

Again drop your *Slide* from 100% to 63% deselect

Rename=*Shadow Left*

*************

22.)Add a New Raster Layer=Go to Selection=Load from disk

*Window On Right* Copy and paste this window Into Selection

Deselect=rename=*Window Right*

*************

23.)Add a New Raster Layer=Go to Selection=Load from disk

* Window On Left* Copy and paste this window image Into

Selection=deselect=rename=*Window Left*

************

24.)Add a New Raster Layer=Go to Selection=Load from disk

*Big Front ARCH with Trim*=Copy and paste the Arch image

Into Selection= deselect=rename=*Big Arch*

************

25.)Add a New Raster Layer=Go to Selection=Load from disk

*Green Edge Stone Left* Copy and paste your stone image

Into Selection=deselect=rename=*Stone Left*

************

26.)Add a New Raster Layer=Go to Selection=Load from disk

*Green Edge Stone Right* Copy and Paste this Image Into

Selection=deselect=rename=*Stone Right*

*************

27.)Add a New Raster Layer=Go to Selection=Load from disk

*Urn's for Front Center* Copy and paste your Urn's Into

Selection=deselect=rename=*Urn's*

************

All Done!! Great Job

Now go Have some Fun
And Decorate to your Heart is content remember You
Don't have to Keep any of these Color's that I used
If you want to change a color or Flood Fill with a Pattern
Go back to that Layer and re load that .sels from Disk for that
And Flood fill with Pattern or Color Also Don't Merge Your
House till you are sure where you would Like things to Go
Like if you want to put some chairs or anything on
Don't merge that so you will be able to add things there
Now We Also Left that One Layer for a Background that can
Be used to add a Scenery to this House Also if you would Like
And you are done with your House you can merge it resize it
And then Add it to a Scene that way you can Place the House
Back in to a Scene and then add flowers or Paths what ever you
Like Always Keep a Layer Open for what ever you would like to
Add A layer Up will always be things In Front of the House

Layers down will always be things In back
Just have
Fun! Fun! Fun!
*********

If for any reason I left something out of a file
Or you are having a problem with something
Feel free to E-MAIL me
*********
Please do not send this Tutorial in e-mail
*The Muriel*
When it is done it will be yours
But do not Call it your own
Or Copy, Reproduce, Republish plus add
It to any Collection

You may place your name on it

But can NOT use a copyright symbol.
The designs at my web-site and

All my Graphics Images are mine and have already

Been Copyrighted to me

Without

*My Permission*
********