To
The Barbara House Tutorial
Hello! Come on with
me and Meet this Lady Barbara
Who Lives in this
House
Here within these
walls lives a Strong and Lovely Lady
The Columns of her
House will show you her Strength
Her Windows show you
her Kindness
And True Spirit of
Her Soul
When you Come to her
Door you will know You have
Just Met a New and
Wonderful Friend
***************
Here is what you will need
If you don't have
The Paint Shop Pro Program Here is where you can
Find it = Click here
This Tutorial was done in PSP 7 but I am sure
It will work fine for you with PSP8
*******
A Special Note
Please respect the time and
effort that I have put into writing this
tutorial
By not copying, in whole or any part, to any
other web site, list or groups
And or claiming it as your own. If you belong to
a Graphics Group
And you think your members may be interested in
doing this tutorial.
I would ask that you send me an email to let me
knew, before providing
A link to this site I would be thrilled with
your Interest,
And Knowing who you Are
Thank you
©CopyrightedGraphicsByToni2004
********
Here are the Selections Files you will Need
Download Selections Files=Click
Here
You will Put these Files in your Selections
Folder
In Your PSP
Here are the Imagine Files you will Need
Download Image Files=Click
Here
You will Put these Files in your Image Folder
In Your PSP
************
Let's Get Started
*********
Open a New Canvas
679x399x16million
Now the Big Part SAVE!
SAVE! SAVE!
If you can't remember Like I do All the time
Go to your Preference down on your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
********
With Any of the Colors I will be using if you
would
Like a Pattern a Different use of Colors
Please do so What I give you is Just a Guide to
Make the House it's All up to you How you want
To See it Decorated just have Fun with it
************
*Note*
This has many .sels files But it will be as easy
as
I could make it for you Most of it will be Flood
fills
And quiet a bit of Copy and
Paste
***********
*With
the Opening of Your New Canvas we have a layer
This Layer I would like you
to name it *Background*
*******
1.)Add a New Raster
Layer=Go to Selection=Load from disk
*Black Square*Flood
fill with this Color#070707=Now keep
This little
square selected now go to Invert= You should
Have The Marching
Ants All over the place Now we will
Go to Effects and to
Drop Shadow and use theses settings
Deselect=rename=*Small Square*
We will be using a
lot of this Drop Shadow
Through out This
Tutorial
************
2.)Add a New Raster
Layer=Go to Selection=Load from disk
*Chimney* Get the
Little Chimney Image and Copy and
Paste Into
Selection=deselect=rename*Chimney*
*************
3.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof* Get the Roof
Image and Copy and
Paste Into
Selection=deselect=rename*Roof*
***********
4.)Add a New Raster
Layer=Go to Selection=Load from disk
*Full House*Flood
fill with this Color#FFFFCD=Keep Selected
Go to
Effects=Textures=BLINDS=Color In Box will
be#A89270
And Use theses
settings
Deselect=rename=*Full
House*
Wasn't that a Great
Show Oh!! sorry my mind wondered =0)
***************
5.)Add a New Raster
Layer=Go to Selection=Load from disk
*Trim on House TOP
Left*Flood fill with this Color*FFFFC0
Keep Selected=Go to
Effects=Textures=BLIND
Using these Settings
Now Keep Selected=Get
your Magic Wand and click anywhere
And go to
Selection=INVERT=Marching Ants should be All
Over=We Will get the
Ant Traps Later don't worry =0)
Now Use the Same Drop
Shadow Settings we did before
Deselect=rename=*Top
Trim Left*
*************
6.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof Trim Left*Flood
fill with this Color#A89270=Into
Selection=Now Keep
selected=Lets do the Silly Marching Ant
Thing again Boy!
theses Ants sure are a Pest =0)
Now Go to
Effects=Drop Shadow=With the same Drop shadow
Settings we have been
using=deselect=rename=*Trim Left*
***************
7.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof Trim
Right*Flood fill with this Color#A89270=Into
Selection=Now Keep
selected=Lets do the Marching Ants
Now Go to
Effects=Drop Shadow=With the same Drop shadow
Settings we have been
using=deselect=rename=*Trim Right*
***************
8.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof Bevel Trim
Left*Flood fill with this Color#9B795D
Go to Effects=Inner
Bevel=using theses settings
And Keep selected and
get that Magic wand again
Here we go with the
Ant thing lol Go to Selection
INVERT=Now to
Effects=Drop Shadow with
The Same drop shadow
settings we have been using
Deselect=rename=*Bevel Trim Left*
****************
9.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof Bevel Trim
Right*Flood fill with this Color#9B795D
Go back to #8
directions and Do all the SAME AS that
With settings and
drop shadow Sorry for Not typing this
All out But I am busy
getting these Ant's here lol
***************
10.)Add a New Raster
Layer=Go to Selection=Load from disk
*Back Post*Now get
your image of the Back Post and Copy
And Past theses Post
Into Selection=deselect=rename
*Back Post*
**************
11.)Add a New Raster
Layer=Go to Selection=Load from disk
*Long Line* Flood
fill=with this Color#D6BD71=Now go
To Selection and
INVERT=Then to Effects=Drop Shadow
Using theses
settings=then deselect=rename=*Long Line*
**************
12.)Add a New Raster
Layer=Go to Selection=Load from disk
*Long-line* Flood
fill=with this Color#D8D8A6=Now go
To Selection and
INVERT=Then to Effects=Drop Shadow
Using theses
settings=then deselect=rename=*Long-line*
***************
13.)Add a New Raster
Layer=Go to Selection=Load from disk
*Long Side Line On
House Left*
Flood fill=with this
Color#DBDBA8=Now go
To Selection and
INVERT=Then to Effects=Drop Shadow
Using the same drop
shadow settings we have been doing
Then
deselect=rename=*Long Side Line*
***************
14.)Add a New Raster
Layer=Go to Selection=Load from disk
*ALL Windows and
Doors* Get your Window and Door image
And Copy and
Paste=Into Selection=rename=*Windows Doors*
*****************
15.)Add a New Raster
Layer=Go to Selection=Load from disk
*Under Porch Trim*
Flood fill=with this Color#548371=Now go
To Selection and
INVERT=Then to Effects=Drop Shadow
Using the same drop
shadow settings we have been doing
Then
deselect=rename=*Under Porch Trim*
*****************
16.)Add a New Raster
Layer=Go to Selection=Load from disk
*Long Porch trim
TOP*Flood fill with this Color#548371
Go to Effects=Inner
Bevel=using theses settings
And Keep selected and
get that Magic wand again
Here we go with the
Ant thing again lol= Go to Selection
INVERT=Now to
Effects=Drop Shadow with
The Same drop shadow
settings we have been using
Deselect=rename=*Bevel Trim Left*
****************
17.)Add a New Raster
Layer=Go to Selection=Load from disk
*VERY TOP Roof
Line*Flood fill with this Color#9F7C58
Deselect=Now Stay
here don't Move Now Go to Selection
And Load from disk
*17a.Bevel on Very Top Roof* Flood
Fill again with the
same Color#9F7C58
Go to Effects using
these settings we have been using
Deselect=rename=*Very
Top Roof Line*
***************
18.)Add a New Raster
Layer=Go to Selection=Load from disk
*Porch Trim Over Post
Back* Flood fill=with this Color#548371
Now go To Selection
and INVERT=Then to Effects=Drop Shadow
Using the same drop
shadow settings we have been doing
Then
deselect=rename=*Trim Over Post Back*
*****************
19.)Add a New Raster
Layer=Go to Selection=Load from disk
*Porch Railing Down*
Get the Porch Railing Image
I named Railing Down
and Copy and
Paste Into
Selection=deselect=rename*Railing Down*
****************
20.)Add a New Raster
Layer=Go to Selection=Load from disk
*Porch Railing Up*
Get the Porch Railing Image
I named Railing Up
and Copy and
Paste Into
Selection=deselect=rename*Railing Up*
***********
21.)Add a New Raster
Layer=Go to Selection=Load from disk
*Front Post with
Topper* Get the Front Post with Topper Image
I named and Copy and
Paste Into Selection
Deselect=rename*Front
Post and Topper*
****************
22.)Add a New Raster
Layer=Go to Selection=Load from disk
*Brick Base of House*
Get the Brick Base Image
I named and Copy and
Paste Into Selection
Deselect=rename*Brick
Base*
If
you would Like to replace this Brick with
something else
And
Flood fill the Sels with a different Stone or
Brick
Don't
Copy and Paste My Brick image Into Selection
Flood
fill with what you would like the settings will
be
On
Texture Pallet 25% sizes=Angle "0"
***************
23.)Add a New Raster
Layer=Go to Selection=Load from disk
*Porch Landing*Flood
fill with this Color#9F7C5F
Go to Effects=Inner
Bevel=using theses settings
Deselect=rename=*Porch Landing*
***************
24.)Add a New Raster
Layer=Go to Selection=Load from disk
*Steps* Get the Steps
Image I named and Copy and
Paste Into
Selection=deselect=rename*Steps*
***************
25.)Add a New Raster
Layer=Go to Selection=Load from disk
*Fancy Trim
Left*Flood fill with this Color#548371
Deselect=rename=*
Fancy Trim*
Now
if you are doing your House in different colors
Then
I
used in the Tutorial you can Flood fill the
.Sels with the
Color
for what ever you are doing
***************
26.)Add a New Raster
Layer=Go to Selection=Load from disk
*Short Trim Top
Left*Flood fill with this Color#548371
Go to Effects=Inner
Bevel=using theses settings
Now go
To Selection and
INVERT=Then to Effects=Drop Shadow
Using theses
settings=then deselect=rename=*Long Line*
***************
27.)Add a New Raster
Layer=Go to Selection=Load from disk
*Arch Window Top
Left* Get the Image I named
And Copy and Paste
Into Selection
deselect=rename*Arch
Window*
**************
HEY!!!! HEY!!!
Besides That I Now
got rid of All the
Marching Ant's For
YOU Are Now
All Done!!
Great Job
=0)
Now go
Have some Fun
And Decorate to your Heart is content remember
You
Don't have to Keep any of these Color's that I
used
If you want to change a color or Flood Fill with
a Pattern
Go back to that Layer and re load that .sels
from Disk for that
And Flood fill with Pattern or Color Also Don't
Merge Your
House till you are sure where you would Like
things to Go
Like if you want to put some chairs on the Porch
Or anything
on your House
Don't merge that so you will be able to add
things there
Now We Also Left that One Layer for a
*Background* that can
Be used to add a Scenery to this House Also if
you would Like
And you are done with your House you can merge
it resize it
And then Add it to a Scene that way you can
Place the House
Back in to a Scene and then add flowers or Paths
what ever you
Like Always Keep a Layer Open for what ever you
would like to
Add a layer Up will always be things In Front of
the House
Layers down
will always be things In back
Just have
Fun! Fun! Fun!
******************
Oh!!! If
You would Like to see All the Houses and other
Beautiful
Things Barbara Makes here's her Website
Take a Peek
You will Be Happy you did =0)
http://www.webartbysue.com/barbspsp/
*********
If for any reason I left something out of a file
Or you are having a problem with something
Feel free to
E-MAIL me
*********
Please do not send this Tutorial in e-mail
*The Barbara House*
When it is done it will be yours
But do not Call it your own
Or Copy, Reproduce, Republish plus add
It to any Collection
You may place your
name on it
But can
NOT
use a
copyright symbol.
The designs at my web-site and
All my Graphics Images are mine and have already
Been
Copyrighted to me
Without
*My Permission*
********
GraphicsByToni
©copyrightsreserve2004
|