Welcome To
Something In Mauve Kitchen
Here is what you will
need If you don't have
The Paint Shop Pro Program Here is where you can
Find it = Click here
This Tutorial was done in PSP 7 but I am sure
It will work fine for you with All The PSP From
7 to 10
It
May Take a few different Adjusts with settings
From
what I have here
******************
A Special Note
Please respect the time and effort that I have
put into writing this tutorial
By not copying, in whole or any part, to any
other web site, list or groups
And or claiming it as your own. If you belong to
a Graphics Group
And you think your members may be interested in
doing this tutorial.
I would ask that you send me an email to let me
know, before providing
A link to this site I would be thrilled with
your Interest,
And Knowing who you Are
Thank you
©CopyrightedGraphicsByToni2004
****************
Here are the Selections Files you will Need
Download Selections Files=Click
Here
You will Put these Files in your Selections
Folder
In Your PSP
Here are the Image Files you will Need
Download Image Files=Click
Here
You will Put these Files in your Image Folder
In Your PSP
*******************
*For More Advance Users of PSP*
If at anytime you want to use your own Patterns
or
Change Color's of your choice
Please feel free to do so
**************************
Let's Get Started
*********
Open a New Canvas
790x485x16million
Now the Big Part SAVE!
SAVE! SAVE!
If you can't remember Like I do All the time
Go to your Preference down on your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
********
With Any of the Colors I
will be using if you would
Like a Wallpaper a Different use of Colors
Please do so What I give you is Just a Guide to
Make the Room it's All up to you How you want
To See it Decorated just have Fun with it
************
*Ok
Note From Me This is a Big Canvas To Work On
I Recommend That You
Clear Your Command History
Out from Time to Time
And If You Get Tired
Save This Work In Your Workspace
And Come Back To It
Later It May be A Little Long To
Do All at Once and
Also If You Are a Newbie It's A Good
Practice To Learn
Saving Your Work To The *Workspace*
You Will Find That
Under Your File Drop Down Menu
*************
1.) Add a New Raster
Layer=Go to Selection=Load from disk
*Floor* Get the Floor
from the image files I sent you
And Copy and Paste Into Selection
Deselect and rename
*Floor*
*********
2.)Add a New Raster
Layer=Go to Selection=Load from disk
* Optional Floor
Outside Circle #1*=Flood Fill with this
Color#9F7F79
Now this Floor is
Optional if you Just want to Use the .sels for
A Floor Fill for the
Color you maybe using that's up to you
Deselect=rename=
*Optional Floor Outside Circle #1*
**********
3.)Add a New Raster
Layer=Go to Selection=Load from disk
*Optional Floor
Inside Circle #2*=You You can Flood Fill
This .sels with a
Color or Use this Stone Setting I have here
Or Use your Own
Patten or don't use anything at All that's
Your Choice
Here I am using here
Eye Candy 5 Texture: Stone Wall
You can Use a Flood
Fill or another Texture
If you Use what I did
with this tutorial
Here are the settings
and color's in the color boxes
Theses can be changed
if your kitchen is all different in color
Deselect=rename=*Optional Floor Inside Circle
#2*
**********
4.)Add a New Raster
Layer=Go to Selection=Load from disk
*Ceiling* =Flood Fill
with this color# D8CCC6
Deselect=rename=*Ceiling*
**********
5.)Add a New Raster
Layer=Go to Selection=Load from disk
*Wallpaper Door Wall*
Flood Fill with the Wallpaper Pattern
I supplied for you in
the Image files with this tutorial
Set your Foreground
with the Wallpaper Pattern
Settings will be 100%
/ angle 0 / Keep selected go
In your Tool Bar to
Color / Adjust / Brightness /Contrast
Brightness -30
/ Contrast 10
Deselect=rename=*Wallpaper Door Wall *
***********
6.)Add a New Raster
Layer=Go to Selection=Load from disk
*Wall Paper
Right*=Flood Fill with the Same Wallpaper
Pattern
100 % / angle 0
Deselect=rename=*Wall Paper Right*
************
7.)Add a New raster
Layer=Go to Selection=Load from disk
*Left
Wallpaper*=Flood Fill with the Same Wallpaper
Pattern
100 % / angle 0
Deselect=rename=*Left
Wallpaper *
***********
8.)Add a New Raster
Layer=Go to Selection=Load from disk
*Door*=Get the Door from image file
if you want a different
Door you can use the
same .sels then adjust your door after
With the Deformation
tool
And Copy and Paste
Into Selections
Deselect=rename=*Door*
************
9.)Add a New Raster
Layer=Go to Selection=Load from disk
*Stone Wall Back
Splash*=From image file get the
Stone Wall Back
Splash
And Copy and Paste
Into Selections
If you are doing
something different like just a flood fill or
A different Pattern
you can still use theses .sels for that
Deselect=rename=*Stone Wall Back Splash*
************
10.)Add a New Raster
Layer=Go to Selection=Load from disk
*Sidewall Back Right*
Flood Fill with this color#AB8F89
Deselect=rename=*Sidewall Back Right*
*********
11.)Add a New Raster
Layer=Go to Selection Load from disk
*Baseboard
Right=Flood Fill with this color#9F7F79
Deselect=rename=*Baseboard Right*
**********
12.)Add a New Raster
Layer=Go to Selection=Load from disk
*Back Far Cabinets
Right*=Flood Fill with this Color#BFA69F
Deselect=rename=*Back Far Cabinets Right*
**********
13.)Add a New Raster
Layer=Go to Selection=Load from disk
*Back Oven Wall
Right*=Flood Fill with this color # F1F1F1
Deselect=
rename=*Back Oven Wall Right*
**********
14.)Add a New Raster
Layer=Go to Selection=Load from disk
*Glass Oven
Windows*=Flood Fill with this Color #C0C0C0
Keep selected go to
Selection to / Invert / Now back to
Effects / 3D Effects
/ Drop Shadow and use theses settings
0 / 0 / 100 % Opacity
/ blue 3
Color in Color Box
will be # 404040
Deselect=
rename=*Glass Oven Windows*
************
15.)Add a New Raster
Layer=Go to Selection=Load from disk
*Oven Doors*= Flood
Fill with this color#F1F1F1
Keep Selected go to
Effects / 3D Effects
/ Inner Bevel /Color in color box is #FFFFFF
Keep selected go to
Selection to / Invert / Now back to
Effects / 3D Effects
/ Drop Shadow and use theses settings
0 / 0 / 100 % Opacity
/ blue 3
Color in Color Box
will be # 404040
Deselect=rename=*Oven Doors*
***********
16.)Add a Raster
Layer=Go to Selection=Load from disk
*Top Cabinets Left*
=Flood Fill with this color# BEA69F
Deselect=rename=*Top Cabinets Left*
*********
17.)Add a New Raster
Layer=Go to Selection=Load from disk
*Oven Trim*=Flood
Fill with this Color#808080
Deselect=rename=*Oven Trim*
************
18.)Add a New Raster
Layer=Go to Selection=Load form disk
*Counter Top #1
right*=Flood Fill with this color # C0C0C0
Deselect=rename=*Counter Top #1 right*
************
19.)Add a New Raster
Layer=Go to Selection=Load for disk
*Small Side Wall
Right Bottom * Flood Fill with this color#BFA69F
Deselect=rename=*Small Side Wall Right Bottom*
*************
20.)Add a New Raster
Layer=Go to Selection=Load from Disk
*Counter Top # 2
Right*=Flood Fill with this Color#C0C0C0
Deselect=rename=*Counter Top # 2 Right*
***********
21.)Add a New Raster
Layer=Go to Selection=Load from disk
*Counter Top
# 3 Left*=Flood Fill with this color# C0C0C0
Deselect=rename=*Counter Top # 3 Left*
*************
22.)Add a New Raster
Layer=Go to Selection=Load from disk
*Baseboard Left*
Flood Fill with this Color#9F7F79
Deselect=rename=*Baseboard Left*
*************
23.)Add a New Raster
Layer=Go to Selection=Load from disk
*Bottom Left Cabinet
Wall * Flood Fill with this Color#BEA69F
Deselect=rename=*Bottom Left Cabinet Wall*
***********
24.)Add a New Raster
Layer=Go to Selection=Load from disk
*All Bottom Left
Cabinets*=Flood Fill with this Color#9F7F79
Keep Selected and go
to / Effects / 3D Effects / Outer Bevel
And Use theses
settings Color in color Box is # FFFFFF
Deselect=rename=*All Bottom Left Cabinets*
************
25.)Add a New Raster
Layer=Go to Selection=Load from disk
*Island Counter Top
*=Flood Fill with this color#C0C0C0
Selection=deselect=rename=*Island Counter Top *
**********
26.)Add a New Raster
Layer=Go to Selection=Load from disk
*Side Wall on
Island*=Flood Fill with this color#9F7F79
Deselect=rename=*Side Wall on Island*
************
27.)Add a New Raster
Layer=Go to Selection=Load from disk
*Island
Baseboard*=Flood Fill with this Color #9F7F79
Keep Selected and go
to / Effects / 3D Effects / Outer Bevel
And Use theses
settings Color in color Box is # FFFFFF
Deselect=rename=*Island Baseboard*
***********
28.)Add a New Raster
Layer=Go to Selection=Load from disk
*Side Trim on Island
*=Flood Fill with this color#9F7F79
Now go to Color /
Adjust / Brightness / Contrast
Brightness - 10
/ Contrast 10 /
Do this Once then do
this again
Deselect=rename=*
Side Trim on Island*
************
29.)Add a New Raster
Layer=Go to Selection=Load from disk
*Island Front*=Flood
Fill with this Color#BEA69F
Deselect=rename=*Island Front*
************
30.)Add a New Raster
Layer=Go to Selection=Load from disk
*Island Brackets *=Go
to Image File and get the Island Brackets
And Copy and Paste
them Into Selection
Deselect=rename=*Island Brackets*
***********
31.)Add a New Raster
Layer=Go to Selection=Load from disk
*Island Edge Trim
*=Flood Fill with this color #C0C0C0
Go to Effects /
3D-Effects / Outer Bevel
And Use theses
settings color in color Box is #FFFFFF
Deselect=rename=*Island Edge Trim*
***********
32.)Add a New Raster
Layer=Go to Selection=Load from disk
*Left Counter Top
Edge*=Flood Fill with this color#C0C0C0
Go to Effects /
3D-Effects/ Outer Bevel /
And Use theses
settings color in color Box will be #FFFFFF
Deselect=rename=*Left Counter Top Edge*
***********
33.)Add a New Raster
Layer=Go to Selection=Load from disk
*Under Cabinet Top
Fill*=Flood Fill with this color#9F7F79
Deselect=rename=*Under Cabinet Top Fill*
************
34.)Add a New Raster
Layer=Go to Selection=Load from disk
*Left Top Cabinet
Wall*=Flood Fill with this Color#BEA69F
Deselect=rename*Left Top Cabinet Wall*
************
35.)Add a New Raster
Layer=Go to Selection=Load from disk
*Cabinet Top Doors
Left*=Flood Fill with this color #9F7F79
Go to Effects /
3D-Effects/ Outer Bevel /
And Use theses
settings color in color Box will be #FFFFFF
Deselect=rename=*Cabinet Top Doors Left*
***********
36.)Add a New Raster
Layer=Go to Selection=Load from disk
*Dishes Left Top*=Get
the Dishes from your Image file
And Copy and Paste
them Into Selection
Deselect=rename=*Dishes Left Top*
***********
37.)Add a New Raster
Layer=Go to Selection=Load from disk
*Microwave*=Get the
Microwave from the image files
And Copy and Paste
Into Selections
Deselect=rename=*Microwave*
************
38.)Add a New Raster
Layer=Go to Selection=Load from disk
*Refrig Side Left*=Flood
Fill with this Color#F1F1F1
Deselect=rename=*Refrig Side Left*
***********
39.)Add a New Raster
Layer=Go to Selection=Load from disk
*Refrig Door*=Flood
Fill with this color #C0C0C0
Go to Effects /
3D-Effects/ Outer Bevel /
And Use theses
settings color in color Box will be #FFFFFF
Keep selected go to
Selection to / Invert / Now back to
Effects / 3D Effects
/ Drop Shadow and use theses settings
0 / 0 / 100 % Opacity
/ blue 3
Color in Color Box
will be # 404040
Deselect=rename=*
Refrig Door*
*************
40.)Add a New Raster
Layer=Go to Selection=Load from disk
*Refrig Handel *=Get
the Door Handel from the image file
And Copy and Paste
Into Selection
Deselect=rename=*Refrig Handel*
************
41.)Add a New Raster
Layer=Go to Selection=Load from disk
*Left Up Front
Cabinet*=Flood Fill with this Color #9F7F79
Deselect=rename=*Left Up Front Cabinet*
***********
42.)Add a New Raster
Layer=Go to Selection=Load from disk
*Fancy Molding
Left*=Flood Fill with this color#BEA69F
Go to Effects /
3D-Effects / Inner Bevel
And use theses
Settings Color in color Box is #FFFFFF
Deselect=rename=*Fancy Molding Trim*
***********
43.)Add a New Raster
Layer=Go to Selection=Load from disk
*Counter Top Front
Left*=Flood Fill with this Color#C0C0C0
Deselect=rename*Counter Top Front Left*
**************
44.)Add a New Raster
Layer=Go to Selection=Load from disk
*Right Bottom Cabinet
Wall*=Flood Fill with this color#BFA69F
Deselect=Rename=*Right Bottom Cabinet Wall*
***********
45.)Add a New Raster
Layer=Go to Selection=Load from disk
*Right Top Cabinet
Wall*=Flood Fill with this color#BFA69F
Deselect=rename=*Right Top Cabinet Wall*
***********
46.)Add a New Raster
Layer=Go to Selection=Load from disk
*Counter Top Edge
Right*=Flood Fill with this color#C0C0C0
Go to Effects /
3D-Effects / Outer Bevel
And Use theses
settings color in color Box is #FFFFFF
Deselect=rename=*Counter Top Edge Right*
***********
47.)Add a New Raster
Layer=Go to Selection=Load from disk
*Very Top Molding On
Both Cabinets* =Flood Fill with this
color#9F7F79
Go to Effects /
3D-Effects / Inner Bevel /
And Use theses
settings color in color Box will be #FFFFFF
Deselect=rename=*Very Top Molding On Both
Cabinets*
***********
48.)Add a New Raster
Layer=Go to Selection=Load from disk
*All Cabinets On
Right=Flood Fill with this color#9F7F79
Go to Effects /
3D-Effects / Outer Bevel
And Use theses
settings color in color Box is #FFFFFF
Now keep Selected and
go to Selections to Invert now go to
Effects / 3D Effects
/ Drop Shadow
And use theses
settings
0 / 0 / 100% Opacity
/ Blur 3 / Color in color box is #404040
Deselect=rename=*All Cabinets On Right*
***********
49.)Add a New Raster
Layer=Go to Selection=Load from disk
*Thin Angle Wall
Right=Flood Fill with this color#9F7F79
Deselect=rename=*Thin Angle Wall Right*
***********
50.)Add a New Raster
Layer=Go to Selection=Load from disk
*Long Wall
Right*=Flood Fill with this Color# BEA69F
Deselect=rename=*Long Wall Right*
***********
51.)Add a New Raster
Layer=Go to Selection=Load from disk
* Stove Top and
Sink*=Go to the image files and get the stove
Top and sink and copy
and paste them Into Selection
Deselect=rename=*Stove Top and Sink*
***********
52.)Add a New Raster
Layer=Go to Selection=Load from disk
* All Handles For All
Cabinets*=Get the All Handles and Copy
And Paste them Into
Selections
Deselect=rename=*All Handles For All Cabinets*
***********
Great
Job!! All Done =0)
Now
go Have some Fun
And
Decorate to your Heart is content remember You
Don't
have to Keep any of these Color's that I used
If
you want to change a color or Flood Fill with a
Pattern
Go
back to that Layer and re load that .sels from
Disk for that
And
Flood fill with Pattern or Color
Just
remember things You
Want
In Front of Something Layers Go Up anything
You
want Behind something Layers Go down
Just
have
Fun!
Fun! Fun!
*********
If for any reason I left
something out of a file
Or you are having a problem with something
Feel free to
E-MAIL me
Please do not send this
Tutorial in e-mail
*The Something In Mauve Kitchen*
When it is done it will be yours
But do not Call it your own
Or Copy, Reproduce, Republish plus add
It to any Collection
You may
place your name on it
But can
NOT
use a copyright symbol.
The designs at my web-site and
All my Graphics Images are mine and have already
Been
Copyrighted to me
Without
* My
Permission*
**********************
<=Back
GraphicsByToni
Copyrightsreserved-2004-06 |