The_Old_Capt's

Welcome To

The Old Capt's Kitchen

Here is what you will need If you don't have
The Paint Shop Pro Program Here is where you can
Find it = Click here

This Tutorial was done in PSP 7 but I am sure
It will work fine for you with All The PSP From 7 to 10

******************
A Special Note
Please respect the time and effort that I have put into writing this tutorial
By not copying, in whole or any part, to any other web site, list or groups
And or claiming it as your own. If you belong to a Graphics Group
And you think your members may be interested in doing this tutorial.
I would ask that you send me an email to let me know, before providing
A link to this site I would be thrilled with your Interest,
And Knowing who you Are
Thank you
©CopyrightedGraphicsByToni2004

****************

Here are the Selections Files you will Need
Download Selections Files=Click Here
You will Put these Files in your Selections Folder
In Your PSP
Here are the Image Files you will Need
Download Image Files=Click Here
You will Put these Files in your Image Folder
In Your PSP
*******************
*For More Advance Users of PSP*
If at anytime you want to use your own Patterns or
Change Color's of your choice
Please feel free to do so
**************************
Let's Get Started
*********
Open a New Canvas
700x600x16million

Now the Big Part SAVE! SAVE! SAVE!
If you can't remember Like I do All the time
Go to your Preference down on your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
********
With Any of the Colors I will be using if you would
Like a Wallpaper a Different use of Colors
Please do so What I give you is Just a Guide to
Make the Room it's All up to you How you want
To See it Decorated just have Fun with it
************

*Ok Note From Me This is a Big Canvas To Work On

I Recommend That You Clear Your Command History

Out from Time to Time

And If You Get Tired Save This Work In Your Workspace

And Come Back To It Later It May be A Little Long To

Do All at Once and Also If You Are a Newbie It's A Good

Practice To Learn Saving Your Work To The *Workspace*

You Will Find That Under Your File Drop Down Menu

*************

1.) Add a New Raster Layer=Go to Selection=Load from disk

*Ocean Scenery* Get the Scenery from the image files I sent you

And Copy and Paste Into Selection

Deselect and rename *Ocean Scenery*

*********

2.)Add a New Raster Layer=Go to Selection=Load from disk

*Floor In Back Room* Go to the Image Files I sent you get your

Floor In The Back Room

And Copy and Paste it Into Selections

Deselect=rename= *Floor In The Back Room*

**********

3.)Add a New Raster Layer=Go to Selection=Load from disk

*Step to Back Room*Get the Step for back room and Copy and

Paste It Into Selection

Deselect=rename=*Step to Back Room*

**********

4.)Add a New Raster Layer=Go to Selection=Load from disk

*Back Room Ceiling* =Get the Ceiling and Copy and Paste

It Into the Selection

Deselect=rename=*Back Room Ceiling*

**********

5.)Add a New Raster Layer=Go to Selection=Load from disk

*Dark Middle Rails* Flood Fill with this Color #583324

Deselect=rename=*Dark Middle Rails*

***********

6.)Add a New Raster Layer=Go to Selection=Load from disk

*Light Tan Post*=Flood Fill with this color#998469

Deselect=rename=*Light Tan Post*

************

7.)Add a New raster Layer=Go to Selection=Load from disk

*Dark Post*=Flood Fill with this Color#583324

Deselect=rename=*Dark Post *

***********

8.)Add a New Raster Layer=Go to Selection=Load from disk

*Fireplace for Back Room*=Get the Fireplace from image file

And Copy and Paste Into Selections

Deselect=rename=*Fireplace for Back Room*

************

9.)Add a New Raster Layer=Go to Selection=Load from disk

*Front Floor*=From image file get the Front Floor

And Copy and Paste Into Selections

Deselect=rename=*Front Floor*

************

10.)Add a New Raster Layer=Go to Selection=Load from disk

*Wood Strip On Floor* Get your Wood Strip and Copy

And Paste this Into Selections

Deselect=rename=*Wood Strip On Floor*

*********

11.)Add a New Raster Layer=Go to Selection Load from disk

*Baseboard Left=Flood Fill with this color#583324

Deselect=rename=*Baseboard Left*

**********

12.)Add a New Raster Layer=Go to Selection=Load from disk

*Middle Ceiling Wall*=Flood Fill with this Color#D3BA83

Deselect=rename=*Middle Ceiling Wall*

**********

13.)Add a New Raster Layer=Go to Selection=Load from disk

*Ceiling One*=Flood Fill with this color # D8CCCC

Deselect= rename=*Ceiling One*

**********

14.)Add a New Raster Layer=Go to Selection=Load from disk

*Ceiling Two*=Flood Fill with this Color #CABAB2

Deselect= rename=*Ceiling Two*

************

15.)Add a New Raster Layer=Go to Selection=Load from disk

*Half Stair Wall*= Flood Fill with this color#F0EACA

Deselect=rename=*Half Stair Wall*

***********

16.)Add a Raster Layer=Go to Selection=Load from disk

*Wall Left* =Flood Fill with this color# 819385

Go to Effects / Texture / Blinds /

And Use theses Settings Color in Color Box with be #404040

Deselect=rename=*Wall Left*

*********

17.)Add a New Raster Layer=Go to Selection=Load from disk

*Half Stair Wall Trim*=Flood Fill with this Color#819385

Deselect=rename=*Half Stairs Wall Trim*

************

18.)Add a New Raster Layer=Go to Selection=Load form disk

*Stairs*=Get the Stairs and Copy and Paste Into Selection

Deselect=rename=*Stairs*

************

19.)Add a New Raster Layer=Go to Selection=Load for disk

*Counter Top Back Left * Flood Fill with this color#D7D1D1

Deselect=rename=*Counter Top Back Left*

*************

20.)Add a New Raster Layer=Go to Selection=Load from Disk

*Bottom Cabinets Left*=Flood Fill with this Color#57634B

Deselect=rename=*Bottom Cabinets Left*

***********

21.)Add a New Raster Layer=Go to Selection=Load from disk

*Counter Top Front*=Flood Fill with this color# D7D1D1

Deselect=rename=*Counter Top Front*

*************

22.)Add a New Raster Layer=Go to Selection=Load from disk

*Bottom Cabinet Trim Left* Flood Fill with this Color#C0C0C0

Go to Effects / Textures / Blinds /

And Use theses settings color in color Box will be #404040

Deselect=rename=*Bottom Cabinet Trim Left*

*************

23.)Add a New Raster Layer=Go to Selection=Load from disk

*Front Sink Panel * Flood Fill with this Color#F1F1F1

Deselect=rename=*Front Sink Panel*

***********

24.)Add a New Raster Layer=Go to Selection=Load from disk

*Half Small Sink Wall Back*=Flood Fill with this Color#57634B

Deselect=rename=*Half Small Sink Wall Back*

************

25.)Add a New Raster Layer=Go to Selection=Load from disk

*Counter Long Half Wall*=Flood Fill with this color#57634B

Now keep Selected and go to Selections to Invert now go to

Effects / 3D Effects / Drop Shadow

And use theses settings

0 / 0 / 100% Opacity / Blur 15 / Color in color box is #000000

Which is Black

Selection=deselect=rename=*Counter Long Half Wall *

**********

26.)Add a New Raster Layer=Go to Selection=Load from disk

*Small Counter Fill*=Flood Fill with this color#D7D1D1

Deselect=rename=*Small Counter Fill *

************

27.)Add a New Raster Layer=Go to Selection=Load from disk

*Trim on Small Counter Fill*=Flood Fill with this Color #C0C0C0

Now keep Selected and go to Selections to Invert now go to

Effects / 3D Effects / Drop Shadow

And use theses settings

0 / 0 / 100% Opacity / Blur 3 / Color in color box is #808080

Deselect=rename=*Trim on Small Counter Fill*

***********

28.)Add a New Raster Layer=Go to Selection=Load from disk

*Sink*=Get the Sink from image files and Copy and Paste

Into Selection

Deselect=rename=* Sink*

************

29.)Add a New Raster Layer=Go to Selection=Load from disk

*Front Side Panel*=Flood Fill with this Color#57634B

Keep Selected and go to Selections to Invert now go to

Effects / 3D Effects / Drop Shadow

And use theses settings

0 / 0 / 100% Opacity / Blur 10 / Color in color box is #404040

Deselect=rename=*Front Side Panel*

************

30.)Add a New Raster Layer=Go to Selection=Load from disk

*Long Shadow Front*=Flood Fill with this color#1D1E1C

Selection=deselect=rename=*Long Shadow Front*

***********

31.)Add a New Raster Layer=Go to Selection=Load from disk

*Wood Base Bottom Front *=Copy and Paste your image Into

Selection=deselect=rename=*Wood Base Bottom Front*

***********

32.)Add a New Raster Layer=Go to Selection=Load from disk

*Front End Trim*=Flood Fill with this color#C0C0C0

Go to Effects / Textures / Blinds /

And Use theses settings color in color Box will be #404040

Deselect=rename=*Front End Trim*

***********

33.)Add a New Raster Layer=Go to Selection=Load from disk

*Bottom Dark Panel*=Flood Fill with this color#363F2F

Deselect=rename=*Bottom Dark Panel*

************

34.)Add a New Raster Layer=Go to Selection=Load from disk

*Bottom Door Out Lines*=Flood Fill with this Color#57634B

Deselect=rename*Bottom Door Out Lines*

************

35.)Add a New Raster Layer=Go to Selection=Load from disk

*Bottom Door Knobs*=Get the Bottom Door Knobs

And Copy and Paste Into Selections

Deselect=rename=*Bottom Door Knobs*

***********

36.)Add a New Raster Layer=Go to Selection=Load from disk

*Back Wall Inside Top Cabinet*=Flood Fill with this color#B3BFB5

Deselect=rename=*Back Wall Inside Top Cabinet*

***********

37.)Add a New Raster Layer=Go to Selection=Load from disk

*Cabinet Selves*=Flood Fill with this color#F0EACA

Deselect=rename=*Cabinet Selves*

************

38.)Add a New Raster Layer=Go to Selection=Load from disk

*Top Cabinet Left*=Flood Fill with this Color#819385

Deselect=rename=*Top Cabinet Left*

***********

39.)Add a New Raster Layer=Go to Selection=Load from disk

*Cabinet Lines*=Flood Fill with this color #57634B

Deselect=rename=* Cabinet Lines*

*************

40.)Add a New Raster Layer=Go to Selection=Load from disk

*Cabinet Doors*=Flood Fill with this Color#819385

And Use theses Settings

Deselect=rename=*Cabinet Door*

************

41.)Add a New Raster Layer=Go to Selection=Load from disk

*Top Door Knobs*=Get the Top Door Knobs and Copy

And Paste them Into Selections

Deselect=rename=*Top Door Knobs*

***********

42.)Add a New Raster Layer=Go to Selection=Load from disk

*Top Trim*=Flood Fill with this color#819385

And use theses Settings Don't worry about the Pictures

Just do the Settings

Deselect=rename=*Top Trim*

***********

43.)Add a New Raster Layer=Go to Selection=Load from disk

*Stove Back Splash*=Flood Fill with this Color#F1F1F1

Deselect=rename*Stove Back Splash*

**************

44.)Add a New Raster Layer=Go to Selection=Load from disk

*Stove Counter Top*=Flood Fill with this color#D7D1D1

Now keep Selected and go to Selections to Invert now go to

Effects / 3D Effects / Drop Shadow

And use theses settings

0 / 0 / 100% Opacity / Blur 3 / Color in color box is #404040

Deselect=Rename=*Stove Counter Top*

***********

45.)Add a New Raster Layer=Go to Selection=Load from disk

*Stove Burners*=Flood Fill with this color#202020

Deselect=rename=*Stove Burners*

***********

46.)Add a New Raster Layer=Go to Selection=Load from disk

*Oven Bottom*=Flood Fill with this color#F1F1F1

Deselect=rename=*Over Bottom*

***********

47.)Add a New Raster Layer=Go to Selection=Load from disk

*Oven Door Trim=Flood Fill with this color#808080

Go to Effects / Textures / Blinds /

And Use theses settings color in color Box will be #C0C0C0

Deselect=rename=*Oven Door Trim*

***********

48.)Add a New Raster Layer=Go to Selection=Load from disk

*Handles Bottom and Top Oven=Flood Fill with this color#C0C0C0

Now keep Selected and go to Selections to Invert now go to

Effects / 3D Effects / Drop Shadow

And use theses settings

0 / 0 / 100% Opacity / Blur 3 / Color in color box is #404040

Deselect=rename=*Handles Bottom and Top Oven*

***********

49.)Add a New Raster Layer=Go to Selection=Load from disk

*Oven Window=Flood Fill with this color#808080

Deselect=rename=*Oven Window*

***********

50.)Add a New Raster Layer=Go to Selection=Load from disk

*Shadow Under Microwave*=Flood Fill with this Color# 808080

Deselect=rename=*Shadow Under Microwave*

***********

51.)Add a New Raster Layer=Go to Selection=Load from disk

* Microwave Front*=Flood Fill with this Color# F1F1F1

Deselect=rename=*Microwave Front*

***********

52.)Add a New Raster Layer=Go to Selection=Load from disk

* Microwave Window*=Flood Fill with this Color#808080

Deselect=rename=*Microwave Window*

***********

53.)Add a New Raster Layer=Go to Selection=Load from disk

* Top Trim On Microwave *=Flood Fill with this Color#F1F1F1

Go to Effects / Textures / Blinds /

And Use theses settings color in color Box will be #404040

Deselect=rename=*Top Trim On Microwave*

***********

54.)Add a New Raster Layer=Go to Selection=Load from disk

*Microwave Panel *=Flood Fill with this Color#F1F1F1

Now keep Selected and go to Selections to Invert now go to

Effects / 3D Effects / Drop Shadow

And use theses settings

0 / 0 / 100% Opacity / Blur 3 / Color in color box is #000000

Which is Black

Deselect=rename=*Microwave Panel*

***********

55.)Add a New Raster Layer=Go to Selection=Load from disk

*Panel Buttons*=Get the panel buttons and Copy and Paste

Them Into Selection

Deselect=rename=*Panel Button*

***********

Great Job!! All Done =0)

Now go Have some Fun

And Decorate to your Heart is content remember You

Don't have to Keep any of these Color's that I used

If you want to change a color or Flood Fill with a Pattern

Go back to that Layer and re load that .sels from Disk for that

And Flood fill with Pattern or Color

Just remember things You

Want In Front of Something Layers Go Up anything

You want Behind something Layers Go down

Just have

Fun! Fun! Fun!

*********

If for any reason I left something out of a file
Or you are having a problem with something
Feel free to E-MAIL me

Please do not send this Tutorial in e-mail
*The Old Capt's Kitchen*
When it is done it will be yours
But do not Call it your own
Or Copy, Reproduce, Republish plus add
It to any Collection

You may place your name on it

But can NOT use a copyright symbol.
The designs at my web-site and

All my Graphics Images are mine and have already

Been Copyrighted to me

Without

* My Permission*

**********************