The_Mellow_Yellow

Welcome To My

Mellow Yellow Kitchen Tutorial

Here is what you will need If you don't have
The Paint Shop Pro Program Here is where you can
Find it = Click here

This Tutorial was done in PSP 7 but I am sure
It will work fine for you with All The PSP From 7 to 10

******************
A Special Note
Please respect the time and effort that I have put into writing this tutorial
By not copying, in whole or any part, to any other web site, list or groups
And or claiming it as your own. If you belong to a Graphics Group
And you think your members may be interested in doing this tutorial.
I would ask that you send me an email to let me know, before providing
A link to this site I would be thrilled with your Interest,
And Knowing who you Are
Thank you
©CopyrightedGraphicsByToni2004

****************

Here are the Selections Files you will Need
Download Selections Files=Click Here
You will Put these Files in your Selections Folder
In Your PSP
Here are the Image Files you will Need
Download Image Files=Click Here
You will Put these Files in your Image Folder
In Your PSP
*******************
*For More Advance Users of PSP*
If at anytime you want to use your own Patterns or
Change Color's of your choice
Please feel free to do so
**************************
Let's Get Started
*********
Open a New Canvas
850x375x16million

Now the Big Part SAVE! SAVE! SAVE!
If you can't remember Like I do All the time
Go to your Preference down on your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
********
With Any of the Colors I will be using if you would
Like a Wallpaper a Different use of Colors
Please do so What I give you is Just a Guide to
Make the Room it's All up to you How you want
To See it Decorated just have Fun with it
************

*Ok Note From Me This is a Big Canvas To Work On

I Recommend That You Clear Your Command History

Out from Time to Time

And If You Get Tired Save This Work In Your Workspace

And Come Back To It Later It May be A Little Long To

Do All at Once and Also If You Are a Newbie It's A Good

Practice To Learn Saving Your Work To The *Workspace*

You Will Find That Under Your File Drop Down Menu

*************

1.) Add a New Raster Layer=Go to Selection=Load from disk

*Floor* Get the Floor from the image files I sent you

I also call this Texture Gray Pearl we will be using this also

With this tutorial and Copy and Paste Into Selection

Deselect and rename *Floor*

*********

2.)Add a New Raster Layer=Go to Selection=Load from disk

*Scenery* Go to the Image Files I sent you get your Scenery

And Copy and Paste it Into Selections

Deselect=rename= *Scenery*

**********

3.)Add a New Raster Layer=Go to Selection=Load from disk

*Ceiling Back Top Right*=Flood Fill with this color #DBDBE4

Deselect=rename=*Ceiling Back Top Right*

**********

4.)Add a New Raster Layer=Go to Selection=Load from disk

*Back Window Outlines* =Flood Fill with this color #404040

Deselect=rename=*Back Window Outlines*

**********

5.)Add a New Raster Layer=Go to Selection=Load from disk

*Back Window Wall Right* Set your Color Pallet to Texture

Get the Texture Gray Pearl from the files I sent you

Set the Texture Foreground to 100 % Angle 0

Deselect=rename=*Back Window Wall Right*

***********

6.)Add a New Raster Layer=Go to Selection=Load from disk

*Kitchen Window Center*=Flood Fill with this color#DBDBE4

Deselect=rename=*Kitchen Window Center*

************

7.)Add a New raster Layer=Go to Selection=Load from disk

*Wall Left*=Flood Fill with this Color#C0C0C0

Deselect=rename=*Wall Left *

***********

8.)Add a New Raster Layer=Go to Selection=Load from disk

*Inside Window Seats*=Flood Fill with this Color#C0C0C0 Deselect=rename=*Inside Window Seats*

************

9.)Add a New Raster Layer=Go to Selection=Load from disk

*Bottom Window Seats*=Flood Fill with this Color#404040

Deselect=rename=*Bottom Window Seats *

************

10.)Add a New Raster Layer=Go to Selection=Load from disk

*Center Windows Outlines* Flood Fill with this Color#404040

Deselect=rename=*Center Window Outlines*

*********

11.)Add a New Raster Layer=Go to Selection Load from disk

*Center Windows=Flood Fill with this color#C0C0C0

Deselect=rename=*Center Windows *

**********

12.)Add a New Raster Layer=Go to Selection=Load from disk

*Center Selves On Windows*=Flood Fill with this Color#C0C0C0

Deselect=rename=*Center Selves On Windows*

**********

13.)Add a New Raster Layer=Go to Selection=Load from disk

*Center Selves Trim*=Flood Fill with this color # 404040

Deselect= rename=*Center Selves Trim*

**********

14.)Add a New Raster Layer=Go to Selection=Load from disk

*Center Top Wall Trim*=Flood Fill with this Color #404040

Deselect= rename=*Center Top Wall Trim*

************

15.)Add a New Raster Layer=Go to Selection=Load from disk

*Ceiling Texture Right and Left* Set Foreground Pallet

With the Gray Pearl Texture and Floor Fill / Now Go To

Color / Adjust / Brightness / Contrast

Set Brightness -20 / Contrast 10

Do Just Once

Deselect=rename=*Ceiling Texture Right and Left *

***********

16.)Add a Raster Layer=Go to Selection=Load from disk

*Angle Wall Right* =Flood Fill with the Gray Pearl Texture

50% / Angle 0

Now Go again to Color / Adjust / Brightness / Contrast

Set Brightness - 20 / Contrast 10

Do this Twice

Keep selected and go to Selections to Invert then to Effects

3D Effects / Drop Shadow / Color in Color Box will be #404040

Blur 5 / 0 / 0 / 100% Opacity

Deselect=rename=*Angle Wall Right*

*********

17.)Add a New Raster Layer=Go to Selection=Load from disk

*Trim Fills*=Flood Fill with this Color#404040

Deselect=rename=*Trim Fills*

************

18.)Add a New Raster Layer=Go to Selection=Load form disk

*Very Top Right Window Wall*=Flood Fill with the Gray Pearl

Texture / 50% / Angle 0

Deselect=rename=*Very Top Right Window Wall*

************

19.)Add a New Raster Layer=Go to Selection=Load for disk

*Small Half Wall Right * Flood Fill with the Gray Pearl Texture

100% / Angle 0

Now Go again to Color / Adjust / Brightness / Contrast

Set Brightness - 20 / Contrast 10

Do this Three Times

Deselect=rename=*Small Half Wall Right*

*************

20.)Add a New Raster Layer=Go to Selection=Load from Disk

*Insert Inside Right*=Flood Fill with this Color#D2B67A

Deselect=rename=*Insert Inside Right*

***********

21.)Add a New Raster Layer=Go to Selection=Load from disk

*Baseboard Right*=Flood Fill with this color# 404040

Deselect=rename=*Baseboard*

*************

22.)Add a New Raster Layer=Go to Selection=Load from disk

*Cabinet Walls Right* Flood Fill with this Color#EBDCAC

Deselect=rename=*Cabinet Walls Right*

*************

23.)Add a New Raster Layer=Go to Selection=Load from disk

*Lines On Cabinet Face* Flood Fill with this Color#808080

Deselect=rename=*Lines On Cabinet Face*

***********

24.)Add a New Raster Layer=Go to Selection=Load from disk

*Cabinet Bevel Trim*=Flood Fill with this Color#EBDCAC

Go to Effects / Inner Bevel /

And Use theses Settings

Keep selected and go to Selections to Invert then to Effects

3D Effects / Drop Shadow / Color in Color Box will be #404040

Blur 3 / 0 / 0 / 100% Opacity

Deselect=rename=*Cabinet Bevel Trim*

************

25.)Add a New Raster Layer=Go to Selection=Load from disk

*Refrig Front Base*=Flood Fill with your Metallic Gradient

You can find in your Own PSP Gradient Files

The One I supplied you with in the Image files

Will only work To Copy and Paste In

Now Keep selected

Go to Color / Adjust / Brightness and Contrast /

Set Brightness 10 / Contrast 10

Selection=deselect=rename=*Refrig Front Base *

**********

26.)Add a New Raster Layer=Go to Selection=Load from disk

*Refrig Side Base*=Flood Fill with your Metallic Gradient

You can find in your Own PSP Gradient Files

Use the settings about

The One I supplied you with in the Image files

Will only work To Copy and Paste In

Now Keep selected

For what we Just did with Refrig Front Base

Go to Color / Adjust / Brightness and Contrast /

Set Brightness -20 / Contrast 10

Deselect=rename=*Refrig Side Base *

************

27.)Add a New Raster Layer=Go to Selection=Load from disk

*Refrig Side Backing*=Flood Fill with this Color #404040

Deselect=rename=*Refrig Side Backing *

***********

28.)Add a New Raster Layer=Go to Selection=Load from disk

*Side of Refrig*=Flood Fill with your Metallic Gradient

You can find in your Own PSP Gradient Files

Use theses Settings in Screen shot

The One Gradient I supplied you with in the Image files

Will only work To Copy and Paste In

Deselect=rename=* Side of Refrig*

************

29.)Add a New Raster Layer=Go to Selection=Load from disk

*Refrig Front Backing*=Flood Fill with this Color#404040

Deselect=rename=Refrig Front Backing*

************

30.)Add a New Raster Layer=Go to Selection=Load from disk

*Front of Refrig Metallic Part*=Flood Fill with your Metallic Gradient

That we have been using and Also the same Settings as Above

In Screen Shot for Gradient

Selection=deselect=rename=*Front of Refrig Metallic Part*

***********

31.)Add a New Raster Layer=Go to Selection=Load from disk

*Refrig Door Handles *=Copy and Paste your image Into

Selection=deselect=rename=*Refrig Door Handles*

***********

32.)Add a New Raster Layer=Go to Selection=Load from disk

*Back Wall For Oven*=Flood Fill with this color#404040

Deselect=rename=*Back Wall for Oven*

***********

33.)Add a New Raster Layer=Go to Selection=Load from disk

*Oven Door*=Flood Fill with your Metallic Gradient

You can find in your Own PSP Gradient Files

Use theses Settings in Screen shot

The One Gradient I supplied you with in the Image files

Will only work To Copy and Paste In

Deselect=rename=*Over Doors*

************

34.)Add a New Raster Layer=Go to Selection=Load from disk

*Oven Handles*=Flood Fill with this Color#C0C0C0

Keep Selected go to Effects / Texture Effects / Blinds

And Use theses Settings

Color is Color Box is #404040

Deselect=rename*Oven Handles*

************

35.)Add a New Raster Layer=Go to Selection=Load from disk

*Dark Part of Cabinet Handles*=Flood Fill with this color#404040

Deselect=rename=*Dark Part of Cabinet Handles*

***********

36.)Add a New Raster Layer=Go to Selection=Load from disk

*Light Part of Cabinet Handles*=Flood Fill with this color#C0C0C0

Deselect=rename=*Light Part of Cabinet Handles*

***********

37.)Add a New Raster Layer=Go to Selection=Load from disk

*Metallic Back Drop*=Copy and Paste the Metallic Gradient

Into Selection

Deselect=rename=*Metallic Back Drop*

************

38.)Add a New Raster Layer=Go to Selection=Load from disk

*Counter Insert*=Flood Fill with this Color#C0C0C0

Deselect=rename=*Counter Insert*

***********

39.)Add a New Raster Layer=Go to Selection=Load from disk

*Cook Top*=Go to your image files I sent you and get the Cook Top

And Copy and Paste the Cook Top Into Selections

Deselect=rename=* Cook Top*

*************

40.)Add a New Raster Layer=Go to Selection=Load from disk

*Top Insert*=Flood Fill with this Color#C0C0C0

Deselect=rename=*Top Insert *

************

41.)Add a New Raster Layer=Go to Selection=Load from disk

*Counter Top Edge*=Flood Fill with this color#808080

Deselect=rename=*Counter Top Edge*

***********

42.)Add a New Raster Layer=Go to Selection=Load from disk

*Island Side*=Flood Fill with this color#EBDCAC

Deselect=rename=*Island Side*

***********

43.)Add a New Raster Layer=Go to Selection=Load from disk

*Island Front *=Flood Fill with this Color#EBDCAC

Keep Selected=Go to Effects / Textures Effects / Blinds

Color Box will be #FFFFFF Which is White

And Use these settings

Deselect=rename*Island Front*

**************

44.)Add a New Raster Layer=Go to Selection=Load from disk

*Island Counter*=Flood Fill with this color#C0C0C0

Deselect=Rename=*Island Counter*

***********

45.)Add a New Raster Layer=Go to Selection=Load from disk

*Island Counter Edge Side*=Flood Fill with this color#404040

Deselect=rename=*Island Counter Edge Side*

***********

46.)Add a New Raster Layer=Go to Selection=Load from disk

*Island Counter Edge Front*=Flood Fill with this color#404040

Deselect=rename=*Island Counter Edge Front*

***********

Great Job!! All Done =0)

Now go Have some Fun

And Decorate to your Heart is content remember You

Don't have to Keep any of these Color's that I used

If you want to change a color or Flood Fill with a Pattern

Go back to that Layer and re load that .sels from Disk for that

And Flood fill with Pattern or Color

Just remember things You

Want In Front of Something Layers Go Up anything

You want Behind something Layers Go down

Just have

Fun! Fun! Fun!

*********

If for any reason I left something out of a file
Or you are having a problem with something
Feel free to E-MAIL me

Please do not send this Tutorial in e-mail
*The Mellow Yellow Kitchen*
When it is done it will be yours
But do not Call it your own
Or Copy, Reproduce, Republish plus add
It to any Collection

You may place your name on it

But can NOT use a copyright symbol.
The designs at my web-site and

All my Graphics Images are mine and have already

Been Copyrighted to me

Without

* My Permission*

**********************