|
Welcome To The *50's Malt Shop*
Oh!!!
Those Oldies But Goodie Days
When the School Bell Would
Ring
and Off We All Would Go
* To The Malt Shop *
Where
we Would have a Coke Or Two and
Fries and Hamburgers
And
We Dance and Dance
With
The Juke Box Just Rocking and a
Rolling Away
*****************************
Here is
what you will need If you don't
have
The Paint Shop Pro Program Here
is where you can
Find it = Click here
This Tutorial was done in PSP 7
but I am sure
It will work fine for you with
PSP8
***************************************
A Special Note
Please respect
the time and effort that
I have put into writing this tutorial
By not copying, in whole or any
part,
To any other web site, list or groups
And or claiming it as your own.
If you belong to a Graphics
Group
And you think your members may
be interested in doing this
tutorial.
I would ask that you send me an
email to let me knew, before
providing
A link to this site I would be
thrilled with your Interest,
And Knowing who you Are
Thank you
©CopyrightedGraphicsByToni2004-05
*********************************
Here are
the Selections Files you will
Need
Download Selections Files=Click Here
You will Put these Files in your
Selections Folder
In Your PSP
Here are the Imagine Files you
will Need
Download Image Files=Click Here
You will Put these Files in your
Image Folder
In Your PSP
********************************
Let's Get Started
*********
Open a New Canvas
850x409x16million
Now the Big Part SAVE! SAVE!
SAVE!
If you can't remember Like I do
All the time
Go to your Preference down on
your File at top
Menu and go to *AUTO SAVE*
I have mine set to 5
************************
With Any of the Colors I will be
using if you would
Like to use a Pattern a
Different use of Colors
Please do so What I give you is
*Just a
Guide *
It's All up to you How you want
To See Your Malt Shop Decorated
I have added
Some Image
Files for you to get you started
Off
With the
Decorating so that will Help a
Bit
Just have Fun with it
*************************
*Note*
This is a
Large Canvas it will be Fast to
Make but
After when
you start Added Layers and
Things
To it Go to
Edit and Clear your Command
History Out
Or work on
this a Little at a time but make
sure when
You go to
Save AS to PSP you Clear your
Command
History and
Your Clip-Board so it will be
Fresh when
You Start
again
1.)Add a New Raster Layer
=Go to Selection=Load from disk
*Scenery* Get the Scenery
Image from the image File
I sent you And Copy and
Paste it Into Selections
Now
Deselect=rename=*Scenery*
************************************
2.)Add a New Raster Layer
=Go to Selection=Load from disk
*Wallpaper On Both Top
Side* Get your Wallpaper
Pattern Image from the
File
Now Go to Foreground on
your Color Pallet set it to
Pattern
Flood Fill with your
Wallpaper Pattern
And Use theses settings
Deselect=rename=*Wallpaper Both
Top Sides*
************************************
3.)Add a New Raster Layer
=Go to Selection=Load from disk
*Ceiling* Now get your
Ceiling Fill image from File
And Copy and Paste it into
Selection
Deselect=Rename=*Ceiling
Fill*
************************************
4.)Add a New Raster Layer
=Go to Selection=Load from disk
*Glass Over Door* Get your
Glass Over Door image
From file And Copy and
Paste Into Selections
Deselect=rename=*Glass
Over Door*
************************************
5.)Add a New Raster Layer
=Go to Selection=Load from disk
*Floor* Now get the Floor
Image from file
And Copy and Paste the
Floor Into Selections
Deselect=rename=*Floor*
************************************
6.)Add a New Raster Layer
=Go to Selection=Load from disk
*Back Wall with Windows*
Flood Fill with the
Light Wood Fill And Use
theses Settings
Deselect=rename=*Back Wall
with Windows*
************************************
7.)Add a New Raster Layer
=Go to Selection=Load from disk
*Top Windows* Flood Fill
with the Same Light Wood Fill
Now Go to Effects / 3-D
Effects /Inner Bevel
And Use theses Settings
Deselect=rename=*Top
Windows*
************************************
8.)Add a New Raster Layer
=Go to Selection=Load from disk
*Added Wallpaper Right*
Change your Light Wood Fill
Now to Your Wallpaper
Pattern again and Flood Fill
Using theses Settings
Deselect=rename=*Added
Wallpaper Right*
************************************
9.)Add a New Raster Layer
=Go to Selection=Load from disk
*Right Small Wall*Now Go
to the Image File and get
Your Dark Wood Fill and
Now Flood Fill with the
Dark Wood
And Use these Settings
Now Keep this Selected and
Go to Selection
To Invert / Back Over to
Effects / 3-D Effects / To Drop
Shadow and use theses
settings
0 / 0 / Blur 3 / 100%
Opacity / Color in Color Box
will be
#404040
Deselect=rename=*Right
Small Wall*
************************************
10.)Add a New Raster Layer
=Go to Selection=Load from disk
*Back Walls of Wall Unit*
Flood Fill with the Dark Wood
Fill
And Use theses settings
Now Deselect=rename=*Back
Walls of Wall Unit*
************************************
11.)Add a New Raster Layer
=Go to Selection=Load from disk
*Bottom Shelf Right* Flood
Fill with this Color #7E5031
Deselect=rename=*Bottom
Shelf Right*
************************************
12.)Add a New Raster Layer
=Go to Selection=Load from disk
*Inside Walls Of Unit*
Flood Fill with the Light Wood
Fill
Keep Selected
Go to Selection to /Invert
Now go back to
Effects 3D / Drop Shadow
and Use these Settings
0 / 0 / Blur 3 / 100%
Opacity / Color in Color Box #
404040
Deselect=rename=*Inside
Walls of Unit*
***********************************
13.)Add a New Raster Layer
=Go to Selection=Load from disk
*Glass Shelves*Get the
Glass Shelves Image from the
File
I sent you and Copy and
Paste them Into Selections
Deselect=rename=*Glass
Shelves*
************************************
14.)Add a New Raster Layer
=Go to Selection=Load from disk
*Bottom of Wall Unit
Right* Flood Fill with the Light
Wood Fill
Using the Same Settings we
have been using right along
For Light and Dark Wood
Fills
Deselect=rename=*Bottom of
Wall Unit Right*
************************************
15.)Add a New Raster Layer
=Go to Selection=Load from disk
*Very Top Post* Flood Fill
with the Light Wood Again
Same Settings Now keep
Selected and Go to Selections to
Invert
Now Back to Effects /3-D
Effects /Drop Shadow/
And use theses Settings
0 / 0 / Blur 3 / 100%
Opacity / Color in Color Box is
# 404040
Deselect=rename=*Very Top
Post*
************************************
16.)Add a New Raster Layer
=Go to Selection=Load from disk
*Post on Wall Unit Front*
Flood Fill with the Light Wood
Fill
Keep Selected Now go to
Selection to /Invert/
Then go to Effects /
Effects 3-D / Drop Shadow
And Use theses Settings
0 / 0 / Blur 5 / 100%
Opacity / Color in Color Box is
# 404040
Deselect=rename=*Post on
Wall Unit Front*
************************************
17.)Add a New Raster Layer
=Go to Selection=Load from disk
*Boot Inside Walls* Flood
Fill with the Wall Paper Fill
Go to Selection to /Invert
Now go to Effects /
Effects 3D / Drop Shadow and Use
the
0 / 0 / Blur 5 / 100%
Opacity / Color in Color Box is
# 404040
Deselect=rename=*Boot
Inside Walls*
************************************
18.)Add a New Raster Layer
=Go to Selection=Load from disk
*Coke Cola Balloon
Shades*Get the Balloon Shades
Image
From the File I sent you
and Copy and Paste
Them Into Selections
Deselect=rename=*Coke Cola
Balloon Shades*
************************************
19.)Add a New Raster Layer
=Go to Selection=Load from disk
*All Eating Boots*Get the
All Eating Boots Image
From the File I sent you
and Copy and Paste
Them Into Selections
Deselect=rename=*All
Eating Boots*
************************************
20.)Add a New Raster Layer
=Go to Selection=Load from disk
*Side Wall Far Left* Flood
Fill with the Light Wood Fill
Using the Same Settings we
have been using right along
For Light and Dark Wood
Fills
Deselect=rename=*Side Wall
Far Left*
*********************************
21.)Add a New Raster Layer
=Go to Selection=Load from disk
*Boot Far Left* Get the
Boot Far Left Image
From the File I sent you
and Copy and Paste
That Into Selections
Deselect=rename=*Boot Far
Left*
************************************
22.)Add a New Raster Layer
=Go to Selection=Load from disk
*Coke Cola Balloon Shade
Far Left*
Get the Balloon Shade Far
Left Image
From the File I sent you
and Copy and Paste
That Into Selections
Deselect=rename=*Coke Cola
Balloon Shade Far Left*
************************************
23.)Add a New Raster Layer
=Go to Selection=Load from disk
*Front Door* Get the Front
Door Image
From the File I sent you
and Copy and Paste
That Into Selections
Deselect=rename=*Front
Door*
************************************
24.)Add a New Raster Layer
=Go to Selection=Load from disk
*All Post* Flood Fill with
the Dark Wood Fill
Using the Same Settings we
have been using right along
For Light and Dark Wood
Fills
Keep Selected and Go to
Selection to /Invert
Now go to Effects /
Effects 3D / Drop Shadow and Use
the
0 / 0 / Blur 5 / 100%
Opacity / Color in Color Box is
#404040
Deselect=rename=*All Post*
*********************************
25.)Add a New Raster Layer
=Go to Selection=Load from disk
*Soda Fountain* Get the
Soda Fountain Image
From the File I sent you
and Copy and Paste
That Into Selections
Deselect=rename=*Soda
Fountain*
************************************
26.)Add a New Raster Layer
=Go to Selection=Load from disk
*Soda Fountain Stools* Get
the Soda Fountain Stools
Image From the File I sent
you and Copy and Paste
That Into Selections
Deselect=rename=*Soda
Fountain Stools*
************************************
All Done!! Great
Job =0)
Remember
You
Don't have to Keep any of these
Color's that I used
If you want to change a color or
Flood Fill with a Pattern
Go back to that Layer and
re-load that .sels
From Disk
for that part
And Flood fill with Pattern or
Color Also Don't Merge Your
Malt Shop till you are sure
where you would Like things
To Go Once
you Merge this Malt Shop you
will Not Be
Able to add
people into it or plants So make
sure
You have it
All decorated the way you
Want it
before Merging the Layers
If you are
Happy =0)
And you are
done you can merge it and resize
it
Add a layer Up will always be
things In Front
Layers down
will always be things In back
Just have
Fun! Fun! Fun!
******************************************
If for any
reason I left something out of a
file
Or you are having a problem with
something
Please Feel free to
E-MAIL me
*************************
Please do not send this Tutorial
in e-mail
*Malt Shop*
When it is done it will be yours
But do not Call it your own
Or Copy, Reproduce, Republish
plus add
It to any Collection
You may
place your name on it
But can
NOT
use a copyright symbol.
The designs at my web-site and
All my Graphics Images are
mine and have already
Been
Copyrighted to me
Without
*My
Permission*
***************************
 
 |