 To Mar Lena's Lane Tutorial
Part Two For House 2
Let's Get Started
*********
1.)Add a New Raster
Layer=Go to Selection=Load from disk
*Background Fill
House*=Flood Fill with this Color#B7C7C9
Deselect=rename=*House
Fill*
************
2.)Add a New Raster
Layer=Go to Selection=Load from disk
*Big Roof* Now get your Big
Roof image and Copy and Paste
Your Roof Image=Into
Selection=deselect=rename=*Roof*
***********
3.)Add a New Raster
Layer=Go to Selection=Load from disk
*House Full*Flood Fill with
this Color#D08B64 Now go to
Effects/Textures/Fine
Leather/and Use theses settings
You will REPEAT this Two
More times On this Effect
So it will be a Total Of
three times In All=deselect
Rename=*Full House*
**************
4.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shadow Bottom Right*Floor
Fill with this Color#000000
Which is Black=Now Drop
your slide Down for 100% to 50%
Deselect=rename= *Shadow 1*
**************
5.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shadow Top Right*Floor
Fill with this Color#000000
Which is Black=Now Drop
your slide Down for 100% to 50%
Deselect=rename= *Shadow 2*
**************
6.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shadow Top Center*Floor
Fill with this Color#000000
Which is Black=Now Drop
your slide Down for 100% to 50%
Deselect=rename= *Shadow 3*
**************
7.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shadow On House*Floor Fill
with this Color#000000
Which is Black=Now Drop
your slide Down for 100% to 50%
Deselect=rename= *Shadow 4*
**************
8.)Add a New Raster
Layer=Go to Selection=Load from disk
*Left Side Outline*Floor
Fill with this Color#400000
Deselect=rename= *Side
Outline*
*************
9.)Add a New Raster
Layer=Go to Selection=Load from disk
*Side Roof Trim Top
Left*Floor Fill with this Color#400000
Now Go to
Effects/Textures/Blinds/Use theses Settings
Color In Color Box is
#844D4A
Deselect=rename= *Side Roof
Trim*
************
10.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shingles Center*=Get this
Image And Copy and Paste
Into
Selection=deselect=rename=*Shingles 1*
*************
11.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shingles Right*=Get this
Image And Copy and Paste
Into
Selection=deselect=rename=*Shingles 2*
*************
12.)Add a New Raster
Layer=Go to Selection=Load from disk
*Shingles Top Right*=Get
this Image And Copy and Paste
Into
Selection=deselect=rename=*Shingles 3*
*************
13.)Add a New Raster
Layer=Go to Selection=Load from disk
*Chimney*=Get this Image
And Copy and Paste
Into
Selection=deselect=rename=*Chimney*
*************
14.)Add a New Raster
Layer=Go to Selection=Load from disk
*Center Top A Roof*=Flood
Fill with this Color#400000
Now go to
Effects/Textures/Blinds/Use theses Settings
Deselect=rename=*A Top
Roof*
*************
15.)Add a New Raster
Layer=Go to Selection=Load from disk
*Tiny Roof Top
Center*=Flood Fill with this Color#400000
Deselect=rename=*Tiny Roof*
************
16.)Add a New Raster
Layer=Go to Selection=Load from disk
*All Windows*=Get this
Image And Copy and Paste
Into
Selection=deselect=rename=*All Windows*
*************
17.)Add a New Raster
Layer=Go to Selection=Load from disk
*All Windows Boxes*=Get
this Image And Copy and Paste
Into
Selection=deselect=rename=*All Windows Boxes*
*************
18.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof Right Bottom*Floor
Fill with this Color#400000
Now Go to
Effects/Textures/Blinds/Use theses Settings
Color In Color Box is
#844D4A
Deselect=rename= *Roof
Right Trim*
************
19.)Add a New Raster
Layer=Go to Selection=Load from disk
*Roof Top Right*Floor Fill
with this Color#400000
Now Go to
Effects/Textures/Blinds/Use the same Settings
As we Just used In Screen
Shot Color In
Color Box is
#844D4A=deselect=rename=*Roof Top Right*
*************
20.)Add a New Raster
Layer=Go to Selection=Load from disk
*Top A Roof Right*Floor
Fill with this Color#400000
Now Go to
Effects/Textures/Blinds/Use the same Settings
As we Just used In Screen
Shot Color In
Color Box is
#844D4A=deselect=rename=*Top A Roof Right*
**************
21.)Add a New Raster
Layer=Go to Selection=Load from disk
*Steps*=Get this Image And
Copy and Paste
Into
Selection=deselect=rename=*Steps*
*************
22.)Add a New Raster
Layer=Go to Selection=Load from disk
*Front Door*=Get this Image
And Copy and Paste
Into
Selection=deselect=rename=*Front Door*
*************
23.)Add a New Raster
Layer=Go to Selection=Load from disk
*Full Porch Railing and
Archway*
Get this Image And Copy and
Paste
Into
Selection=deselect=rename=*Full Porch*
*************
24.)Add a New Raster
Layer=Go to Selection=Load from disk
*Trim Over Windows*Flood
Fill with this Color#D7C3AD
Now go to Effects=Inner
Bevel and Use theses settings
Same Color#D7C3AD in Color
Box
Deselect=rename=*Trim Over
Windows*
*************
25.)Add a New Raster
Layer=Go to Selection=Load from disk
*Trim Across Porch
Archway*Flood Fill with this Color#D7C3AD
Now go to Effects=Inner
Bevel and Use the same settings
We Just Used Same
Color#D7C3AD in Color Box
**************
26.)Add a New Raster
Layer=Go to Selection=Load from disk
*Center Middle Roof*Flood
Fill with this Color#400000
Use theses Settings that we
used for Other Trims
Deselect=rename=*Center
Middle Roof*
**************
27.)Add a New Raster
Layer=Go to Selection=Load from disk
*Porch Roof*=Get this Image
And Copy and Paste
Into
Selection=deselect=rename=*Porch Roof*
*************
That's It For House 2
Remember
You
Don't have to Keep any of these Color's that I
used
If you want to change a color or Flood Fill with
a Pattern
Go back to that Layer and re load that .sels
from Disk for that
And Flood fill with Pattern or Color Also Don't
Merge Your
Houses till you are sure where you would Like
things to Go
Like if you want to put some chairs on the Porch
Or anything
on your House
Don't merge that so you will be able to add
things there
Ok! Let's
Say You Like your House and you have added
What
You wanted to it You are
Now Going to RED X
Your
Background layer Out and House 1 Out
Click On Layer*1-House Fill* that we Renamed
That we
started with for this *House 2*
And Right
Click and Go to
Merge
Visible Now you will have Three Layers Your
Background
Layer and Your House 1 and New House 2
Which You
Can rename *House2*
Click On
Next to Continue to House 3
*************
GraphicsByToni
©copyrightsreserve2004 |